I’m looking at making a wooden keel fin that is FCS compatible. Does anyone have a guide with specs or dimensions for the “tenens” or “knobs” that would fit into the FCS plugs and how far apart to space them?
thanks.
I’m looking at making a wooden keel fin that is FCS compatible. Does anyone have a guide with specs or dimensions for the “tenens” or “knobs” that would fit into the FCS plugs and how far apart to space them?
thanks.
g’day ‘9fish’ !
the tabs ?
do you have an existing board with plugs already in it ? [ I ask, because … the third plug is the same distance apart as the other two are on a ‘normal’ fcs fin…]
From measuring my plastic p.o.s. gs f.c.s. fin […intial mania !]
the ‘tabs’ are…
3/4" wide , 17/32" deep
and about 1 10/32" apart [from the front of the back tab , to the back of the front tab …
does that make sense ? I hope so …
( and , in cms, it’s… much easier …
2cm wide , 1.5cms deep
and 3.3cms apart
[multiply by 10 , if you prefer working in “mms” ! ]
I wonder if F.C.S. actually has this stuff on their website ? [… or , would it be 'copyright ', I wonder??]
oh , by the way … the THICKNESS of the tabs ??
7-8/16" [c. 1/4"] of an inch [about .6 of a cm?]
if you are making wood [then fibreglassing ] keels …make the tabs smaller and thinner , to allow for lots of glass on the tabs , and drill out the grub screw hole , and fill it with resin and milled fibre …epoxy resin for the fins , preferably [I reckon it’s stronger…but that’s just my opinion , I might be wrong…]
here’s a homemade fibreglass one …I hope this is to scale ? [scanned]
Note that these tabs on this keel ARE a little ‘out’ from the measurements I gave , to allow the fin to move back and forewards a little in the plugs…
… well mate , I hope this helps you !
cheers !
ben chipper
Thanks for the reply. I did go to the FCS website and they didn’t have anything on the specs.
you’re welcome mate !
Let us know / ?see? how you go with making the keels eh ?
cheers !
ben
…I never saw that thread before …
shows how busy sways gets at times …hard to keep up !!
Ambrose as usual was priceless with his humour …worth reading just for the M&M comment !
ben
the beauty of ‘mms’ …
if you tell girls your wiener is 180, they may join you for dinner.
Or they may freak out , and run a mile or fifty [sorry , that ‘should’ be a ‘kilometre’ , shouldn’t it ?? …mixed metricphores, my mistape !]
hi 9fish !
…here’s the new fcs one…
(With thanks to ‘Lob’ for posting this in the “french fishy cuisine” thread … I hope you don’t mind me ‘pilfering’ it , mate ?)
cheers !
ben