auto ciear coat

after the board has a hot coat i was told I could air brush it then spry a clear coat of krylon on it and that would work would it be better to spray an auto clear coat seems like it would harden and seal better. DAWG

Just yesterday I sprayed the entire bottom of my 6’3" Q4 with automotive clear coat.This is a two year old board that had tar and wax scabs all over the bottom. I cleaned it, sanded out to 220 and sprayed a couple medium wet coats and it looks real good. Scott

most short boards here on the gold coast are finihsed with automotive clear… some add flattening base to dull the shine and we call it protec… http://www.feraldave.com