Big Guy Mini Gun Dimensions?

Hoping someone might be able to run dimensions for a Big Guy Mini Gun.

I am thinking a board that is 7’6 in length with maybe a swallow tail. I weigh 210lbs and I am 6’4.

I would like to float around belly button high.

Other ideas as to style of board are welcome as well, as there are a couple of breaks that are hard to get into but that suck up on reef once you are in. Basically you want a longer board to get in, but then once you are in you want a short board.

Thanks in advance…

Righto,7’6x 20" o 21" probly 20& 1/4 to 1/2. 2& 7/8ths thick. depending on where you are and the waves I would go a double concave, but the yanks will tell you flat to vee, thats up to you.

finished today

6’11" x 20 1/2" x 2 7/8" all epoxy wood lam, ordered from Iraq and was suppose to pick up the 28th. Scrambled on the weekend so soldier can pick up tomorrow while on leave in Hawaii with his family. Only $575.00 with leash and fins, tail block if you want, you can even come by, we can talk, I can bring out some blanks and bang on them. We can talk about flex and composite construction if you want. I can buy a small can of polyester resin and crack it open to get a familiar aroma if needed.

Regarding float around belly button high. I donated mine to the naval reserves so I no longer have one, but I get the picture. I am 6’4" and 210 and this would be right about there.

oh , as usual this board with proper care will last a lifetime.

Here’s from six foot six, 230 pounds: 7’10" x 20.5 x 3, 12 inch nose, round pin single fin w/tail maybe 14" or so, flat bottom. No I don’t have a picture. I like to think this board is from the late 70s/early 80s, Sunset Beach style of things.

Charlie