Blank for 5'10" Biscuit

General Discussion
1

So my friend and I are going to re-create a 5’10" Biscuit…hopefully.

We are trying to find the best blank to start with. Ive checked out USBlanks and Marko Blanks, but am having trouble ‘seeing’ what blank would be good to start with.

Here’s the dems on the board:

Front Rail rocker - 3 7/8"

Rear stringer rocker (due to heavy V) - 2"

Thickness - 3" at center

Width - 20.5"

 

Thanks

Brian

2

digsdics:

Just use a 65A from US Blanks

Orange Density for super light

Red Density for light

You can get one from a distributor in your area.

Kind regards,

surfding

I mention the 65A due to the desired thickness of 3".

3

65A is my vote too with a bit of extra nose rocker so its noy totally flat depending on where you are going to lay it out for your rocker.

If you are looking at EPS like marko you can just get a square cut eps blank as oppossed to a molded blank.