Im Making another board, this ones going to be my personal “fun board” I’m thinking of this for dimensions : 8’10" 18N 22.5C 13T x 3.25thick Im looking to make an “easy to ride, [but still can turn well]” kind of board. I just finished a 10’6" for tiny summer waves, and now I want an “all around” board from chest-to-head high+. I have a 9"0 but I made it too heavy and its 24" C so kind of hard to turn, any suggestions for an all around board, or are my measurements ok for what I’m trying to achieve ? Thanks for any advice
Im Making another board, this ones going to be my personal “fun > board” I’m thinking of this for dimensions : 8’10" 18N 22.5C 13T > x 3.25thick Im looking to make an “easy to ride, [but still can turn > well]” kind of board. I just finished a 10’6" for tiny summer > waves, and now I want an “all around” board from chest-to-head > high+. I have a 9"0 but I made it too heavy and its 24" C so > kind of hard to turn, any suggestions for an all around board, or are my > measurements ok for what I’m trying to achieve ? Thanks for any advice make it about 9’0" long. concave the bottom about 1/2 way towards the back leading into a double concave for teh last 2-3 feet or so. have it about 23" wide. and about 3 - 3.25" thick. have a rounded-square tail that is about 12" wide, with the nose being 18". i’m trying to think of the same board the local board maker is currently doing. it’s a nice shape and will be easy to turn once it’s completed. i hope this has helped. by the way. those measurements i gave u were a guess. but the tails tip wasn’t very wide allowing for easier turns.
Im Making another board, this ones going to be my personal “fun > board” I’m thinking of this for dimensions : 8’10" 18N 22.5C 13T > x 3.25thick Im looking to make an “easy to ride, [but still can turn > well]” kind of board. I just finished a 10’6" for tiny summer > waves, and now I want an “all around” board from chest-to-head > high+. I have a 9"0 but I made it too heavy and its 24" C so > kind of hard to turn, any suggestions for an all around board, or are my > measurements ok for what I’m trying to achieve ? Thanks for any advice This is where a good shaper would have to ask for your height, weight and age. Be as specific as you want.
Thanks, I forgot to mention that, I’m 40,5"9’ just under 200 lbs, surf often, in OK physical shape. I ride my 9"0 most of the time and it is about 3.25 thick, and have no problem with the float Thanks again>>> This is where a good shaper would have to ask for your height, weight and > age. Be as specific as you want.
Thanks, I forgot to mention that, I’m 40,5"9’ just under 200 lbs, > surf often, in OK physical shape. I ride my 9"0 most of the time and > it is about 3.25 thick, and have no problem with the float Thanks again DEWEY:One thing you forgot to mention is where you surf and type of waves (reef, point, jetty, beachbreak) but from what you have said and your size for a performance fun shape I would say go about 21 3/4 wide 17 1/2"-18" nose and widen the tail to 14" if your surfing reef or point make it 13 1/2" and around 2 3/4"-3" thick but your length might be a tad long so you could drop it to 8’ 18"n-22 1/2"wp-14 1/2"t to get more vertical performance out of it either way rocker and “v” slight concaves in the tail will all loosen it up so you don’t end up with just a short longboard thats stiff—good luck to ya