Cant find foam in Oregon

Ive been looking everywhere for some xps or eps foam that is 2lb density but I cant find it anywhere nearby.  I have found foamular 600 and dow high load 60 but I cant find a store that sells it.  I live in Portland Oregon and I would like to buy a foam block so I can make my own blank.  If you know of any stores or anything that sells a quality eps or xps foam block, I would appreciate if you left a post.  Thanks

boat stores, dock foam?

No blocks,  But I’ve got lots of Poly and quite a few EPs slab blanks at ridiculous  prices.  Lots of Poly “seconds” 50–75% savings.  Unless you just want to go thru the drill for the sake of the learning experience.  If you consider the cost of your labor, a hotwire(and yes boys I know he can make his own), the block, glue, clamps and stringer material.  I know quite a few guys up here who have alot of EPS experience and they are over it.  You can get 2 lb. in Oregon.  There are a couple of sources.  Better luck in Wash. State.  Lightest densities are scarce in the Beaver state…  If you can cut a good rockered, stringered shortboard blank blank  for $25 --$45 let me know.  Try a an excellent Arctic 1st glassed with Epoxy.  Within 5 or 6 ounces of an EPS blank and much better quality than a piece of “dock” foam.  No spackling or sealing necessary.  Also have epoxy and cloth.      Oregon Shapers in Pacific City.           Lowel