Hey everyone. I am looking for a cheap place to buy resin and have it shipped, I am nearer the east coast but will gladly do Cali if it’s cheaper. Also, I am about to have some blanks shipped from Brad at Foamez; prices seem fair enough for the blanks and the shipping. Is this my best option? Thanks for any help- connor
Hey everyone. I am looking for a cheap place to buy resin and have it > shipped, I am nearer the east coast but will gladly do Cali if it’s > cheaper. Also, I am about to have some blanks shipped from Brad at Foamez; > prices seem fair enough for the blanks and the shipping. Is this my best > option? Thanks for any help- connor Fiberglass Florida quoted me $US 525.00 for a drum (55 US gallons)of Silmar 249A. They’re located in Rockledge Florida - not too far from Clark Foam in Melbourne. I’ve dealt with FOAMEZ - they’re responsive and reliable. Make sure you inspect yor blanks for damage in the presence of the shipper. Blanks will develop cracks under pressure - these cracks are almost impossible to see without some manipulation. If you live outside the US, its cheaper to drive across the border to pick up your shipment. Good Luck http://fiberglassflorida.com/2000/
Fiberglass Florida quoted me $US 525.00 for a drum (55 US gallons)of > Silmar 249A. They’re located in Rockledge Florida - not too far from Clark > Foam in Melbourne. I’ve dealt with FOAMEZ - they’re responsive and > reliable.>>> Make sure you inspect yor blanks for damage in the presence of the > shipper. Blanks will develop cracks under pressure - these cracks are > almost impossible to see without some manipulation.>>> If you live outside the US, its cheaper to drive across the border to pick > up your shipment.>>> Good Luck Thanks Greg for the response. I was going to have the blanks set on the doorstep, but now I will definitely try to be there upon arrival. I will also give Fiberglass Florida a call. Thanks again- connor
I have had really good luck with Brad @ Foam-ez. I needed to get a board shipped to Fla. & with his help, it got there in less than 5 days in perfect conditioin. Also been able to get custom stringers in short order. Good service is hard to find, & its nice to have sources you can depend on. Ray