Cleaning out the shop..

I’m cleaning out the shop and looking to clear out some things.

I have a 9’6"x24"x approx.20" billet of 2.5lb EPS.

3 9’2" long board blanks(2 with 6mm PVC stringers, 1 with 1/4" bass),

3 9’8" long board blanks(1 with 1/4" cedar,1 with 6mm PVC, 1 with 1/4" bass),

few fish blanks, and a SK10-1 Austin Foam Core.

Also have a 10’ sheet of 6mm PVC foam sheet(about 36" wide).

Make a reasonable offer for one or all.

I’m in Westminster, CA.

Tim Stamps

Stamps Surfboards

www.SURFBOARDSbySTAMPS.com

Tim,

Hope all is great with you !

I noticed that you used the Red-X Box/fins in the Bonzer board on you web page…Great box system.

You should get some response for those blanks here !

See you in the water,Man ! Herb

Hey Herb-

All is good…been a while…actually last time I saw you I think is when I was walking across PCH in Seal??

I’ve used the Red-X a few times…solid system, but the decks have never held up around the plugs. Only used them on myself and bros/pros boards to see how they would hold up. Mainly using Futures and a few LokBox.

Hopefully I can pass some of these materials along before they all go to the dump.

Have a lot of used boards sitting around too.

Hopefully the red tide goes away soon…

See ya around,

Stamps

Come on sways people ! Here’s a chance to get some materials, and meet a legend !

Ya Tim,

It was me.I was heading to see Rich to pick -up a blank(s).I was driving a Nissan Dentra rental(truck was in the body shop.A teenie girl left turning into it).

Rich said you were going on a trip south,hope it was great for you.

Red-X makes a cover for the top of the box that stops the cave-in stuff,and I’m currently coming up w/a plug mold for a soft ,snap-in type cover ,made of soft plastics for that problem and eliminate water travel thru the box as well when there’s no fin in it…

The water quality sucks in OC as of present…It has the whole year for the most part.We just didn’t get enough rain.

I’ll see you around,til then you keep to your guns and say Hi for me to everyone.Herb

Oops !

BAD DOG Koa !

I told you no more playing on the computer !

Tim-

Are the 9’8" blanks EPS or Poly? If Poly, who are they made by? If there not seconds, and straight, I’ll offer you $80 for the 9’8" with cedar stringer…Let me know. Thanks.

Oh, and if you happen to come across an extra set of shaping/glassing racks, I’m really in need of a new set too…

The blanks are all EPS.

They are good, just require a little bit of actual shaping.

no extra shaping stands. . . .

Thanks for the reply. I’ll pass.

How big are the fish blanks, and how much would you want for one of them?

I have a 6’0", 6’2", and a 6’8".

You can have them for $25 each.

Hi Tim,

How much do you need for the EPS 9’2"'s?

-Jay

Jay-

I’ll let them go for $50 each

Tim

If i can get my lazy butt up there I’ll be on it. I’ll keep you posted…3 day weekend and all.

-Jay

Cool…Just let me know.

Give a call or an e-mail

Great…I’ll send you an email and figure out when I can come by and pick them up.

Thanks