I just finished my 1st fish after several longboards. My plan is to do a flag pattern on the bottom (Blue upper third with Red/White Wavy stripes on the bottom 2/3s)
Looking thru the archives I think I can do this with water based acrylic (spray cans, no air sprayer)directly on the foam. I was concerned that it might cause delams but I think several posts said…don’t worry about it. I thought I could also spray it on the hot coat and gloss over it. I’m not sure I want to try tinted resin panels on my first go at epoxy. Any advice would be greatly appreciated.
Thanks in advance
Doc
