Easiest Blank

Of all the Clark blanks, which is the easiest/most shaper-friendly to shape?

Of all the Clark blanks, which is the easiest/most shaper-friendly to > shape? The one closest to the finished product.

Of all the Clark blanks, which is the easiest/most shaper-friendly to > shape? skip’s right, get the closest one to the shape you want. the blanks i’ve used and really like; 6’0"R, 6’4"R, 6’6"P, 6’7"R, 7’0"R, 7’3"P, 7’5"(this one is actually a little too close), 8’4"S, 9’5"S. these are all very close tolerance blanks. i was very impressed w/ the Patterson blanks. i find some Rusty blanks too thick or thin in the tail for the proportions, but depending on the board you want one of these should work. if you want a hybrid/thicker board, the 6’11"R, 7’4"R, 7’11"R series are good. peace.