Boards are all PU/PE
Going to bali in september, going to make a 6’5" step-up. I’m not sure of the fin placement and glass to put on since all my boards are around 6’0" and 4x4x4 oz E cloth, but I was thinking maybe 4x4x4 with carbon fibre hybrid 80mm innegra rail tape for the rails at the back foot. http://www.shapers.com.au/carbon-fibre-hybrid-80mm-innegra-rail-tape/
fin placement something like this: rear fin 4" up, side fins at 12" up with 1/4" toe in at 1" from the rails and a cant of 5 degrees?
Also while I’m asking about fin placement, does anyone know what a 5’10" hypto Krypto’s fins placement is? I have a mates who has a 6’1" and another who has a 5’5" (which I’m going to measure and guess in between if I can’t get a answer :) ) but not a 5’10", its on the cards to be another build after the step-up
- See more at: http://www.swaylocks.com/forums/new-to-site-just-few-questions-and-progress-log?page=2#sthash.h8GDVzE0.dpuf
I purchased a zona spoke shave http://www.shapers.com.au/zona-spoke-shave/ , but it doesn’t shave the stringer like my other planes do or like in this video: http://www.foamez.com/spokeshave-p-156.html , I’ve tried adjusting the blade all the way in until it didn’t cut at all but all it seems to do is scratch and make tiny bumps