Fin theory,tom,halycon and others

General Discussion
461

Rooster

I have the keel template that you showed in the thread above
at that same 8.25" base, 4.5" depth.
It that’s the one you want let me know.
If not we can come up with something else.
“Quillas” attached

Stay Stoked, Rich
I

1936×2592 917 KB

462

Wow, Rich, send those red puppies to me. Along with a paypay request.

463

Hi Greg,

FYI. The Quillas are Helically foiled.
The idea of using the FCS system and placing
the fin tabs full forward is to facilite greater natural
flexiblity during the turning moment and give more snap
and power. It makes the fins more alive.
I don’t have a red panel to cut them from
but I do have a yellow one. I can post a photo of a set
if you like.
I can do them for FCS, Future, or as Glass-ons – your choice.

Attached are a transparent Orange set of
"Onward" template in Future Boxes.
They have similar surface area but are a little more upright. 
PM me an Email address and we'll go from there, okay?

Stay Stoked, Rich

https://swaylocks7stage.s3.us-east-2.amazonaws.com/s3fs-public/IMG_0076_2.JPG
465

bye

466

Has anyone else experimented with cutaways ?
Either on the leading or trailing edge or both ?

467

bye

468

bye

469

Its interesting that new design starts out as wacky, then its got a logo on it.

1600×900 122 KB

470

And from the last post on page 1 by Blakestah…
", Bert posted about a front AND rear cutaway. I made a single glass fin yesterday from this template for my system. "

I’m not sure if the front cutaway ever got any more attention.

912×1402 37.9 KB

471

I’ve made a few fins with the front and back cutaways similar to Blakestahs concept.
Much like Berts feedback there’s a freedom to the turns but I think there’s more to discover by testing them against standard fins at the same time.

472

rooster great shape!!!
greg and halcyon - insane fins!!!