All right I need to remove some fins as I missed the placement and fin size. I was wondering if anyone could recommend the best way to remove the fins? I have thought of many ways but would just like to hear peoples experiences, recommendations on this sort of thing.
All right I need to remove some fins as I missed the placement and fin > size. I was wondering if anyone could recommend the best way to remove the > fins? I have thought of many ways but would just like to hear > peoples experiences, recommendations on this sort of thing. …Chris just get your trusty grinder out,with a cutting disk or whatever you have, cut around the base of the fins,don’t cut to far into the glass that you tag the fin or cut into the board.Then simply snap them over with your hand (snap them over alittle at a time so you don’t pull up your glass from the board,you may need to cut alittle more after your first attempt).Grind off the excess rope/resin,clean-up the fins&bottom,and you’re ready to start over.