Glass Schedule for a epoxy EPS 6´4´´x 19 5/8 x 2 1/2 channel bottom

[stoneburner]

It might be possible to tape off your bottom channel area for a thin resin pre-seal. Pull the tape when the resin has reached the state of making stiff peaks when poked with a popsicle stick or wood match. Then do this…

Stoneburner's assist build 48 1/2" body board

My glassing skills with epoxy are mediocre.  The biggest challenge for me on this channel was a clean glass job on the channel’s 90 degree edges and inner bottom angles.  I figured Charlie could do it without problems. While Charlie was working on this build, I was trying to come up with a good way to hand laminate the channel.  The standard recommendation from several members has been to use spray adhesive to tack the dry cloth to the channel walls.  The biggest drawback to that method is find…