I saw this board in a mag and just can’t get it out of my mind. I’m partial to nice full noses and sleek pintails so I’m sure thats why. Anyway if you gents are inclined could you please help me take a stab at picking it apart? I skimmed through about five mags so far and haven’t seen anything that provides dims that looks close to it.
Possibly:
9’2" x 19" x 22.5" x 14.25" x 2.75" ??
Cheers!
Ray B.
try the southcoast longboard site. they have the dimensions of similar boards. your dimensions are good but i would go narrower in the nose . only an inch or so.
Surfdad
I would go with less nose in a 9’2" maybe 18.5" max. Just my personal preference makes it more of an allrounder given the other dims. would still noseride well.
Nice looking board gotta say the nose do’nt look that wide in the photo obviously well blended curves.
Cheers
Mooneemick
Okay, so you gents think my dims look pretty accurate with the exception of the nose which should be a little smaller?
SurfDad, Using the APS3000 software I imported your jpeg as an “Image Board Outline” and drew an outline that fairly accurately corresponds to that board. The dimensions came out to: 9’2" x 17.75" nose x 22.5" wide point x 13.75" tail. The photo is a little asymmetrical so those numbers aren’t exact, but they’re close. Those numbers are a little narrower in the nose and tail than you might be looking for. I think the original has a bit more of a “pin” in the last few inches of the tail as well.
Kind regards,
Steve Coletta
Steve, You’re awsome! I’m looking forward to building this one for myself. Thanx again for those #'s
Cheers!
Ray B.
