Made a panel with three layers (Red, White, Blue). I hacked it a bit however I will get it right next time. When doing color combinations you need to let each section of color fully cure to prevent bleed. The shape of the fin is going to be fine I think? It's for a crazy nose rider for those small day. More of a SANO Cruiser. Here's a few pic of my hacking:
No see no pics. I often find that pics won’t load to the initial post in a new thread. Gotta follow up with a 2nd post for pics to show. Why? Damned if I know?
While I’m at it… Why does it say my post was entered at 12:28 pm when it’s 7:28 am, my time? I have my options set for my local time. Weirdness.
Fin Panel to Fin
This is the board the fin is for:
https://swaylocks7stage.s3.us-east-2.amazonaws.com/s3fs-public/stripe.jpg
…hello Surfding,
you need to put 3 clear layers between colors…
Thanks Reverb: I bought a big piece of glass and have been making my own panels. On solid color panels no problem. However I had some bleed between colors has you can see in the pics. I will make a new panel with many colors and use 3 layer of clear between colors and hope to have it solved. I like making my own shapes on fins and seeing how they translate to function. Now I just have to get my panel making down when it comes to more than one color. Hopefully your tip will solve this part of the equation!
Kind regards,
Surfding
