Hey everybody, I wanna make surfboards real cheap like so’s I can sell them for more money and make lots of money and stuff. I hired some Mexican kids’s to cut out the shapes of surfboards I copyed off of other surfboards onto this cool cheap foam I can buy at my local home depot its 3in thick 25in wide and .80 a ft. Then I bring the shapes to the shaper machine guy that I found in the phone book, he charges $29.00 a board if I do ten boards at a time. Then I go to this auto body shop in the seady part of town and the guys’s there glass them real cool for like for $12.00 a board if I bring them 10 or more. So thats like $46.20 a board so far! Than I have a cabenet shop glue on the fin they do a real cool job for like $2.00 each if I bring them 10 or more. So my cost of the finished boards is $48.20 each. So I went to my local surf shop and the cool guys working there said they would put my boards on concienment, that was 5 weeks ago and my boards are still there. Any ideas would be great! You guys are great! Thanks RC