Professional Boatbuilder magazine is having an online infusion
demo. The brief is as follows:
Are you up-to-speed on the current state of vacuum-infusion processing?
Join us on March 18 at 11:00 a.m. Eastern Daylight Time for a detailed
look at how to set up your own shop for infusion. We'll also show you
how students at Skagit Valley College are learning infusion processing,
and you will see them working on a project, step by step.
This
fast-moving demonstration will also describe how infusion can help
you to reduce the risk of part loss while simultaneously enhancing part
quality and ease of inspection. Whether you are new to infusion, an old
hand, or in process of changing over to closed molding, this event will
help you to anticipate the challenges and rewards of working with
vacuum-infusion processing. Following the 25-minute presentation, you
will have the opportunity to ask our speaker, Michael Swietzer, your questions
about infusion and about the Skagit Valley College Marine Trades program.
(If you are unable to attend the “live” session,
register anyway, and you will
have free access to the recorded session for a period of 30 days.)
The Link to register is here
If you are already bagging, this opens
the possibility of doing the whole board
in one shot. Another boatbuilding/composites
crossover to boards.
The magazine is full of some neat stuff also.
All of the back issues are online.
Pete