Finally finished my “Bonzer” style 3 fin arc tail. Thanks to all of you for your help. Hopefully we’ll have something to ride it on tomorrow for my birthday. Well, here are some pics. The side fins ended up being 10" x 3", set off the tail 12", trailing edge is 1 1/2" off the rail.
This board was made out of an old longboard that had been given to me by a friend. Fin box was recycled from the old board. So board #2 is done, on to board #3, 6’4" fish.
I like it. The reason I like it may surprise you. It is nearly identical to the 1971 SURF SYSTEMS New Shape, and the 1971 SURFBOARDS HAWAII Gemini Twin Fin. Both designed and manufactured by me. I recently made two ARC TAIL twin fins for some fellows here in the San Diego area. Ironically both boards were 6’8"
This board was made out of an old longboard that had been given to me by a friend. Fin box was recycled from the old board. So board #2 is done, on to board #3, 6’4" fish.
Awesome job 5finglide. good looking board, The coolest part is that you made it out of old longboard. Recycling at it’s best… that board has soul man!