Lokbox bonzer fin position help

I have a 7’6” Surftech Takayama egg that I am converting to a 5 fin bonzer set up, using the lokbox bonzer fin set. Hoping someone here might be able to shed some light on the positions / toe in on the two pairs of runners. I know that the positions/interrelationships between the fins is very important and cant find much in the archives to go on, thanks in advance and merry christmas to all.


You should fine it here in the Bonzer Q+A thread

If not let me know

Hey Markyv

Interesting choice for a 5 fin conversion. I assume the egg is a 2+1 setup now.

How do you think the performance will change/hopefully improve with this fin setup. I had a 7’2"Takayama egg which was a favorite of mine for some time so I will be interested to hear how your project goes. Maybe some pics if you can and then a ride report.

Good luck with it.

Cheers and Merry Xmas



Thanks a lot, everything I need right there. Don’t know why I couldn’t find that in my search?


The board is not mine, the owner is a bit bored with the performance and is not able to get a new board, so thought a bonzer set up would produce more variety in set up and ride. I will get the board after christmas and will get some photos of progress on here.

This one

Lokbox Bonzer Side Runners… http://www.swaylocks.com/forum/gforum.cgi?post=345636;search_string=Lokbox%20Bonzer%20Side%20Runners…;#345636

and this one

Bonza Fin Positioning


will help heaps too.

Merry Christmas


Thanks for those links mate, much appreciated