hi, would like to know wot size blanks most people are using for there minni simmons projects?
Fish blanks glued to custom rockers, if you need more width some PU blank makers can insert a center section to widen. Or just get some eps and cut your own, no limits then...
[img_assist|nid=1055161|title=minis|desc=|link=none|align=left|width=480|height=640]
ths stuf gets mentiond alot in the recent posts in 'bars of soap' thread....
I have used kneeboard blanks ( too much curve for traditional ) and longboard blanks, also a few fat fish blanks out there.....
I've made 2. Used an 8'0" OH US blank for both, Hated wasting the foam and would like to hear what other suggest.
US blanks, 6-2 A. I can only go 22.5 inches wide on it though. Mike
I made mine out of a GreenLight EPS 6’6" UTF blank… Came out pretty well:
Was interested on the same thing… and kind of limited to US blanks, the others are too expensive for my hands… and don’t know where to get EPS here…
thanx , yeah the waste factors a problem. Im a back yarder, were's best to bin your blank off cuts, or reycle?