I think you’re right.
A grit barrel should work well.
I may try a small hand-held belt sander with 40 grit belt.
After I build the twin-channel prototypes, I may start hybridizing using a foam and FG bottom with a 0.5” thick EVA foam deck.
Wipe Out!!!
Too late, too deep.
Cold had removed the spheres from the brass monkey. That and a strong North wind burned way too much body fuel to stay warm.
Hopefully daytime air temps in the 80s (rather than 50s) will change the dynamics a tad for me.
@wacosurf_tx, with @ebodyboarding, #texastubetour
From Chad Stickney’s helmet cam while riding my 42-inch, channel-tail prototype at Waco Surf.
My interview with retired Pro-Bodyboarder Jay Reale at Waco Surf (10/16/2023). May need to crank up the volume some.
I recommend viewing it in "full screen” mode.
