Moon Tails! (don't moon me-haha)

[parthenonsurfer]

Hi Bill,

End of tail dimension (the edge of your box) is 6 - 3/4".  12" up from the tail is 16". Mid width is 20- 1/4".  Overall length is 6’ (along the bottom). Using Future Fins and back of center fin will be at 3 - 5/16". Hope this helps. Let me know if there’s anything else you need.

Chris

[jellyfishhh]

It’s not a custom stretch. It’s a surftech tl2 5’8 quad

[stoneburner]

@$1

Hi Bill,

End of tail dimension (the edge of your box) is 6 - 3/4".  12" up from the tail is 16". Mid width is 20- 1/4".  Overall length is 6’ (along the bottom). Using Future Fins and back of center fin will be at 3 - 5/16". Hope this helps. Let me know if there’s anything else you need.

Chris

Chris,

By my calculations, you need the arc of a 6.75-inch chord in a circle with a diameter of 9.7 inches.

Bill

 

[parthenonsurfer]

Thank you Bill. I’ll keep you posted.

Chris