In the last 5 years I have been transitioning off bodyboards to finless PU paipos…
The hulls are inspired by simmons and wegeners seaglass, using single open concave out through the tail and V on the outer edges.
Started with a US blanks Green foam 5.8RP blank with -1/2"T/-1/2"N rocker an a old growth redwood stringer, I have used the denser green foam as I cut into the soft center of the blank.
Previous boards have had chine rails like a bodyboard, this is my first test to see how a normal 60/40 surfboard rail will hold finless.
