Hey guys, this is my first time posting because I hit a little road block with fixing the nose of my 6’1" thruster.
I’ve fixed a good amount of dings before but I’m not sure exactly how to put the cloth to the nose. I broke about 1/2 inch off of the nose. Any advice is greatly appreciated.
Thanks -AG
Tape off the area you want the glass.
About 3" behind that area, tape some cloth onto the board, extending past your ding. Of course, you have to tape off or mold release the area you don’t want the glass to stick.
Glass the big patch…when it gells, cut off the stuff you don’t want with a single edged razor.