i was going to get everyone’s reply and type up something for the Resource page. why does the orange peel effect happen? what causes it? how to prevent it? and finally…how to fix it
In polyester orange peel on hot coats or glosses is from to little wax solution. A way to fix it is, after it cures, wipe the surface with acetone and then get about 10 sheets of 80 grit paper and sand it like a man. With epoxy Additive F solves the problem. If you have one that orange peels, sand it so to remove the major roughness then shoot another coat with Additive F in it. Should flow out fine.