Overloaded APS3000 Shaping Business

General Discussion
1

My name is Matt Ambrose and I own an APS3000 shaping machine in Pacifica and offer superwhite surfblanks from Australia. I was told of a post that was put up on the 15th of Feb about the fact that my business is overloaded and there is no more room. This is false. I am working with many shapers of various sizes who are serious about quality, building their label or increasing the business they have already set up. In this industry it is hard to keep everybody happy. Thanks. Matt Ambrose

2

It’s been announced on “Industry Talk” also.

3

Hey Matt,

Does ASI have a website?

kirk

4

AHA.matt ambrose

I heard the story

and wondered …

sounds like

left brain heaven

…ambrose…

copying quality

products

an interesting destiny

5

Can the average Joe walk into your place with a design template on a disc, buy a blank from you, and pop the blank into your machine, and in 15 minutes walk out with a 80% shaped board?

Could I bring in a design on a disc and for the blank use a Clark blank I have laying around and have it machine shaped there?

Could I bring in a design on a disc and for the blank, use a 8 ft long by 2 ft wide by 5 inch thick hunk of EPS and have it shaped there?

How would I go about making sure any design template I come up with would ‘fit’ inside any of the blanks you sell? You must have blank templates, right? Would there be a way you could post a few of these blank templates? This way I could take one of them, do my design ‘inside’ the blank, and not have to worry about tweaking my deisng at the last moment in your shop to make sure it would ‘fit’ the blank I would buy from you.

6

Hey Matt,

I don’t want to be disrespectful.

I call you about a month ago and you said you were max out.

So, what is this mean. I heard from other friends the same thing.

Are you really taking orders from anyone or you just posted this to look good.

If you’re taking orders, I’ll be shooting you an email.

Tnanks,

Jhonny J.