Would it be okay to do a UV lam at night/early early morning under incandescent lighting, then have it sit for a few hours til the sun came out? Or is it necessary to have it kick asap?
I’d want the resin to kick soon after the weave is filled and you’re through laminating. Better not to give time for the resin to soak-in, the cloth to float or your laps to unwrap.
JW
ahh good points. thanks for that.
Just add some catalyst, kick it slow if you need the time. use enough so that it’ll at least gell then just finish it off when the sun comes out. You should always use some cat anyway, otherwise all the drips and puddles in your workspace will always be a gooey mess