I am thinking of build an 11’6 paddle/surfboard that can also be used for a father and son surfing expirence. The combined weight of the two riders is about 350lbs. I was wondering if these deminsons sounded correct: 11’6 Nose 19 mid 25 tail 16 thickness 4.5 - 5". I don’t know what kind of rocker it needs. I was thinking 4 - 4.5" in the nose 3.5 - 4 in the tail. Does this sound right? Anybody had any expirence with this. I serched the archives but couldn’t find what I was looking for. Any help would be greatly appreciated. Thanks Andy
I am thinking of build an 11’6 paddle/surfboard that can also be used for > a father and son surfing expirence. The combined weight of the two riders > is about 350lbs. I was wondering if these deminsons sounded correct: 11’6 > Nose 19 mid 25 tail 16 thickness 4.5 - 5". I don’t know what kind of > rocker it needs. I was thinking 4 - 4.5" in the nose 3.5 - 4 in the > tail. Does this sound right? Anybody had any expirence with this. I > serched the archives but couldn’t find what I was looking for. Any help > would be greatly appreciated. Thanks Andy …What you got there should work,I’m no expert in this area,but back in the 90s when Bob,and Anna were the ,“thing”,I did check out a few of there boards,and they were smaller than what you are going for.Bob is living on Oahu,hangs at Canoes I hear tale,see if you can locate him,tell him Herb from Anaheim Hills,Ca. that gave him the cattle dog from hell sent you…ON SECOND THOUGHT, DON’T TELL HIM I SENT YOU!!! HE’LL PROBABLY RUN YOU OFF THE BEACH!!!Herb.