having glassed the board now noticed that a small area of paint has bled on to the white (only like a fine spray but definetly visible! anyway of covering it? posca’s/ white spray??? thanks
having glassed the board now noticed that a small area of paint has bled > on to the white (only like a fine spray but definetly visible! anyway of > covering it? posca’s/ white spray??? thanks … ,I don’t know where you are in the glassing phase but you can spray/dust a light amount of white paint over the area by feathering it in.Just remember to tape off the stringer and other vurnerable areas. …Unless it’s really bad I would leave it.It will fade quickly,because it’s thinned in the resin coat.Herb
Herb one more question… [blush]) is the paint to be sprayed before hot coat over the cloth? thanks
Herb one more question… [blush])>>> is the paint to be sprayed before hot coat over the cloth? thanks …if your glossing,no after you sand it out.if you’re doing a sand only board, then yes.Herb