PE resin to plywood best bond method?

General Discussion
1

I may use PE resin to glass my new truck camper built with1/8" Luan outer skins. Any wood glassers out there figured out the best bond, glassing methods? Most glassing will be done in the flat, down position inside a garage, no direct sun exposure. Thanks

2

If at all possible I would use epoxy resin for that type of project.  It will bond much better to your wood.

3

 

GTFD I would put one of these products down first as a primer. Duratec Polyester Sealer or Duratec Polyurethane Wood Sealer. 

 

4

if thatis your only option, then I would paint it with some lam resin thinned with styrene, let cure, then glass. that is what I do with wood fins

5

[quote="$1"] if that is your only option, then I would paint it with some lam resin thinned with styrene, let cure, then glass. that is what I do with wood fins [/quote]

Yep.