Single fin pintail:6’10", 19" wide 5" forward of center, 2 3/4" thick, 16 1/2" nose, 11 1/4" tail4" nose rocker3" tail rockerbottom profile: 1/4" concave in nose to allow/encourage riding with a forward stance, flat through the middle for fast trimming and V at tail for drivey carve turns.
“I was thinking a 7” or 8" fin, something thin and fast, maybe greenough inspired."
Thats exactly what I was picturing it with, I’t gonna look sick can’t wait to see it finished.
As far as a name I’d wait till it’s finished before christening it. If it were green I’d call it “the green hornet”, if its purple I’d call it “the purple meany”
I call my wooden board of a similar template “the enforcer”.
Hey there ww. Funny you say yhte green hornet. I decided on that last night with a good friend of mine after hotcoating… heres another pic… with both hotcoats done… only sanding left now! and gloss… also attached is a fin I got out of the garage - I was experimenting with it about 3 years ago but it will be perfect to cut down and reuse for this… even the colour is perfect.