Pinched 50/50 rail

Want some help with 50/50 rail. I can get the egg rail but I prefer the pinched knifier rail like Weber did on his Performer. Is it as simple as stair step cutting the blank by opening the planer blade on each subsequent pass and then blending it in with a sanding block? I want to get a slight roll on the bottom of the board starting about 4 inches or so from the rail. ( I think ) Thank, JC

Want some help with 50/50 rail. I can get the egg rail but I prefer the > pinched knifier rail like Weber did on his Performer. Is it as simple as > stair step cutting the blank by opening the planer blade on each > subsequent pass and then blending it in with a sanding block? I want to > get a slight roll on the bottom of the board starting about 4 inches or so > from the rail. ( I think ) Thank, JC JC-Sorry I missed ya the other day, stop by and I’ll show ya a couple ways to get that light roll in the bottom rail like the old classics-later clay

Clay…I don’t care what they say about you…your allright with me. Thankyou oh sevant of the foam! See you soon. PS hope the sinus is better! JC