please help... my fcs plugs have just arrived and id like to get it wet on sun...

General Discussion
1

hi guys, i want to convert the first board i made into a four finned beast, i want to give it a bit more speed and drive and generally spice things up a little, hope you guys can give me some suggestions,

its a homeblown blank

6’4" x 22.5" with centre just forward a little

nose 17"

tail 5.5" deep butt crack 12" between tail points

the centres of the rear fcs plugs are 11.5" from tips and 2 " off the rail and the fins are lined up to a point 1.5" in front of the nose.

my thoughts for the new fins are

  • centres of the rear plugs to tips 17"

  • 1.75" from rail

toed in a little bit more than rear fins

cant will be standard fcs side fin setting

i have the option of riding the following fins G7000, MRTX, and GAM L/R

what differences do you think ill feel between bigger fins in front/at rear?

ive attached some photos to give you an idea of the setup.

http://s216.photobucket.com/…current=IMG_1793.jpg

http://s216.photobucket.com/…current=IMG_1792.jpg

http://s216.photobucket.com/…current=IMG_1791.jpg

http://s216.photobucket.com/…current=IMG_1790.jpg

http://s216.photobucket.com/…current=IMG_1787.jpg

http://s216.photobucket.com/…current=IMG_1786.jpg

2

[/img][/img]

3

[/img]

4

[/img]

5

[/img]