hey guys i’ve got another question. If i lay down a tarp under my glassing rack or some plastic sheeting down and then glass my board will i be able to pull off the fallen epoxy/resin off of the tarp/plastic sheet? i was thinking of using the fallen stuff and making some art thing
Easily peels off tarps!!
Ha. I just tried that in my parents garage. It depends on how much resin hits the tarp. I was doing some colour work and alot of my resin ended up the tarp. I ended up having to grind it off the cement floor. The areas that didn’t have much resin on them pulled up fine though.
Use Parafin Wax on the tarp.
It works as a releasing agent.
2 - 4 mil painters clear plastic drop cloth works well. I perforate it and apply it to the top of a wet skimboard in my molding press. It peels off very easily. I can use the same piece about a dozen times without any release agent.