Just mix a really,really thick gummy batch of lam resin,and cabocel(like > your fcs putty in consistancy).THIS WILL ALLOW YOU TO SET YOUR FINS > WITHOUT TAPE…downtown2 A hot glue gun is pretty effective. No mixing, it “gels” RIGHT NOW, and holds great till the glass goes on. cheers!
A hot glue gun is pretty effective. No mixing, it “gels” RIGHT > NOW, and holds great till the glass goes on. cheers! just make sure you carefully remove (with straight edge razor blade) any glue that may have squeezed out from under the fin. laminating resin will not stick to it. jim dunlop
I agree with Jim. It’s the cleanest most effective way. I’ts also the only way I know how to do it…and If I can do it ANYBODY can. Get the glue gun!