Renovatio......(rebuild with pics)

Been a while now to starting this project … but had an old board passed down from an uncle, was a fluro yellow and orange H.I.C board from South Africa… over the years became dinged and dented and water logged… so i decided to strip it and re-build it to again pass onto a nephew…

Enjoy…

After stripping the glass off:

During the reshape:

Final Product…

The board started as 6’ something thruster… with channels… Bennet surfboard…

Filled in the channels to get a flat bottom… cut in a bit of a different tail for a change… sprayed with rattle cans… made into a quad…

Great fun, even better to see the smile on his face …

Catchya

Ant

Well done Lavz, did you use epoxy again?

What are it’s measurements…

Yerp…

Its 5’3 x 19’’ x 2 3/4’’

Epoxy with 1 layer 6 oz on bottom, and 2 layers on top…

spackle to fill in the channels / concaves / divots…

It just a throw around board for my nephew to learn on and bash around till he surfs well enough for his own custom lavz built board :wink:

Just set the leash plug then… i love routers… best tool i have…

Catchya.

good work lavz!

I think that some strange thing must have happend to you while stripping that glass, this get the swaylocks 2006 award for most unique planshape!

Cheers.

Well i heard respirators give you cancer… so i dont use one…

and theres no plan in this shape thats for sure…

hahaha

thanks mate for posting those …

guesses …

tail 17" ?

nose 11" ?

" it’s a lavzor zap "

nice colours too …were they spraycans from ‘surf supplies’ ?

I’m starting on my next board tomorrow …

wozzies get busy !

ben

p.s. - you got fins for that board ?