When you add colour to the resin, does it create a good effect? and what coat do you add it too? i was thinking of red…
When you add colour to the resin, does it create a good effect? and what > coat do you add it too? i was thinking of red… Does it add a good effect?? Check out the link below for Copperfish! Tints can be added to the lam or hotcoats just depends on what you are trying to do with it. For a solid color do it in the lam coat. You might want to try a lighter color first as I understand darker colors are a bit harder to work with. http://www.copperfishsurfboards.com
Be sure to mix color with all the resin you need at the start, or else you will waste much time trying to match colors later. Good luck!
Be sure to mix color with all the resin you need at the start, or else you > will waste much time trying to match colors later. Good luck! be sure to save some of the resin before you kick it too o just in case you do need some extra you wont have o mix colors to match all over again.
be sure to save some of the resin before you kick it too o just in case > you do need some extra you wont have o mix colors to match all over again. Thanks for the advise, i’ve shaped the blank! so now its time to try it and see!