I am having trouble finding a web site with instructions for tinting.
I have shaped a few boards but never attempted to tint.
This project will be an old board that I am going to strip and reglass.
Any help would be appreciated
Hi Allan,
Lots of info here on tints, cut laps etc…check out the usual suspects for techniques.
DARTH VADER is a good source of all things tint. BAMBAM also knows his onions. Do a
search on them and see what comes up.
Post up more specific questions and you’ll get better results.
Howzit ALLAN, It’s a simple process. Mix your tint with a little resin ( couple of ounces)in a separate container then run through a paint filter in to your bigger batch for lamination. Stir it in really well and make sure you run the mixing stick around the inside of the bucket to make sure it fully mixed. Aloha,Kokua
Thanks for the info.
I’ll do some looking around on the site and see what I can find.
OK my brain hurts now.
This site is awesome.