On the Clark video the guy who does the bit on sanding says to use a sander with 2800rpms. I went down to a hardware store and all they had were 10,000 OPM grinders. I assume OPM is the same as RPM. However palm sanders are rated around 10,000 OPMs. My question is will a 10,000 OPM grinder with a sanding disk attached fly thru my board or rip it off the stands, etc? Thanks.
On the Clark video the guy who does the bit on sanding says to use a > sander with 2800rpms. I went down to a hardware store and all they had > were 10,000 OPM grinders. I assume OPM is the same as RPM. However palm > sanders are rated around 10,000 OPMs. My question is will a 10,000 OPM > grinder with a sanding disk attached fly thru my board or rip it off the > stands, etc? Thanks. …Yes,but you’ll probably catch it in the gut! …Checkout the archives for Harbor Freight Tools Sander.If you’re not doing production level sanding, this is the sander for you !Herb.