Saw this anyone using these as of yet?

HOMEBLOWN US ANNOUNCES THE WORLD’S FIRST “GREEN” SURFBOARD BLANKS

Ned McMahon, General Manager for Homeblown’s U.S. manufacturing plant in San Diego, CA exhibited the surf industry’s first “green” surfboard blanks at Surf Expo. Homeblown US manufactures Biofoam blanks in which nearly 50% of the core ingredients are from agricultural products. Biofoam is produced by replacing the polyol component of the foam with materials converted from natural plant oils.

According to McMahon, “Until now, there has been no foam blank like Biofoam which is a far better alternative for the environment. Surfboard makers have only focused on the longevity of their materials as an answer to the environmental pressures. Biofoam represents the first…truly eco-friendly and environmentally sustainable” surfboard blank in the industry. A life cycle analysis of Biofoam indicates that its production results in 36% less global warming emissions and a 61% reduction in non-renewable energy use.

Biofoam is as lightweight and as strong as any foam blank on the market and shapes as well as any other polyurethane foam blank. Biofoam, because of its nature, has a finer and more uniform cell structure compared to those made with petroleum-based materials with which most standard surfboard blanks are still made. The foam created from biomaterials also exhibits excellent strength and flex.

Homeblown US is a sister company of Homeblown UK which developed a manufacturing process that allows its advanced computerized technology to be implemented wherever the market exists. This agenda is part of the “green philosophy”, because shipping raw materials is 18 times more efficient than shipping blanks.

Homeblown worldwide is known for its aggressive pursuit of the ultimate Ecoboard in partnership with U.K. based Eden Project and Chuck Menzel of Wetsand, Inc. This product brings domestic alternatives to a segment of the surf industry which has never been environmentally sustainable.


Homeblown US is situated in San Diego in order to support the largest surfboard manufacturing base in the United States. In addition to manufacturing in the U.S., Homeblown has manufacturing plants in the U.K. and South Africa. HomeblownUS is a member of 1% for the Planet.

If you would like additional information on Homeblown US, contact:

Ned McMahon

General Manager

Homeblown US

10326 Roselle Street #103

San Diego, CA92121

Tel: (858) 587-2163

They are in my neck of the woods I may go say hi and see if they are any good.

The Homeblown folk gave us one of their blanks to try about a month ago. I’m not sure wether it was Biofoam-at least that was’nt mentioned when I was part of the connversation with their rep. Anyway it was the first MDI foam I have seen that looks and performs good. All of the things you expect from a PU blank was there. The foam was quite uniform (no bubbles, no hard or soft spots, no pour streaks). The gluing of the stringer was good. The foam cell structure is very similar to US blanks and Just Foams. Also it sands easy and takes paint very well.

Im going to try and get an interview on this for 21.