I just got a 5.5 amp type III, skil 100. It has never been used for shaping before. Does anyone know what I need to do to modify it the best way. Thanks in advance. I am stoked to finaly have one.
I just got a 5.5 amp type III, skil 100. It has never been used for > shaping before. Does anyone know what I need to do to modify it the best > way. Thanks in advance. I am stoked to finaly have one. Congrats. You might try putting a long cord on it. File and wetsand the edges of the base and nose. Sharpen and reset the blades. Losen up the depth lever if so desired. Cut the tail of the base off if you want but its not needed…go sideways into the rocker. Check the brushes, if they are “sparking” you can try cleaning them or replacing,Try to keep an extra set around.Also get a spare belt. Blow it out with air after every board. Or you could send it to me and I will buy you a brand new little green planer.