My intention wasn’t to say that all fins with that template are based on the H2 and followed the H2, just using an example to get my point across.
Using like denotes similarity and has no implication on time or sequential order.
H2s are like Speed Dialers and Speed dialers are like H2s.
…yes the H2 s are similar to the speed d lokbox es, but only the front ones
lokbox,
it have differents sizes like the H2 s ?
thanx
What would be a good ball park rocker for such a board?
I’d like to echo the rocker question. I’ve seen that Pavel’s 6’0" speed dialer has about 4 3/8 nose rocker and 2 3/8 tail rocker (assuming my lay the board on the ground and measure the nose and tail method yields accurate results). Still looking for more info there…
Ok I'm new here but I'll toss my .02$ I'm 6ft even and ~205lb in the summer, so this guy and I seem to be similar in shape. My summer board of choice is a 6ft Zippi Fish (21 3/4 and 2 7/8), which seems to be a little more foam than you want to set this guy up with. My advice is not to size him down too much. Sure the guy can ride a lower volume board, but he's going to tire faster. At least this is what I find happens to me, and late in my sessions I'm appreciating the extra foam.
What is the most common bottom shape? Vee, concave etc? How about fin positioning as well? How much are the fins toed in?
Dave_D
The speed dialer boards are a double into a single…go figure/ It seems to work, though. I have heard they are some of the fastest boards on the planet.
Lokbox…what are the dimensions on your speed dialer? Nose and tail is what Im looking for/
I live around the corner from Pavel’s shop and those boards look like they have the width.
I am 6’0" about 200lbs, and I have a 6’2" Pavel Speeddialer. I think that I could of gone with a 5’10".
If you want to take the template off of my board PM me and we can hook up. I live in OB too.
Quote:I am 6’0" about 200lbs, and I have a 6’2" Pavel Speeddialer. I think that I could of gone with a 5’10".
If you want to take the template off of my board PM me and we can hook up. I live in OB too.
If this ever happens, shoot me a pm – I’d like to measure that board very much!