Supercgargers???

Herb, Just wondering if those replacement chargers got sent. Please let me know if you need the address again. Thanks, Rob.

Is this Rob from NSB? If so, I have got an extra set, if you want to borrow them until yours come in. Let me know. They are the Type 4.

Is this Rob from NSB? If so, I have got an extra set, if you want to borrow them until yours come in. Let me know. They are the Type 4.

Herb: E-mail me off the Board Archive- don’t have your new e-mail addy any more. Tom Sterne>>> Herb, Just wondering if those replacement chargers got sent. Please let me > know if you need the address again. Thanks, Rob.

Herb: E-mail me off the Board Archive- don’t have your new e-mail addy any more. Tom Sterne>>> Herb, Just wondering if those replacement chargers got sent. Please let me > know if you need the address again. Thanks, Rob.

Is this Rob from NSB? If so, I have got an extra set, if you want to > borrow them until yours come in. Let me know. They are the Type 4. Thanks for that Mike. I’ve been anxious to give em a try. Hoping they make me want to keep a board that’s too stiff. If u give me your e-mail I’ll get in touch. You’re probably only minutes away. Thanks again, Rob.

Is this Rob from NSB? If so, I have got an extra set, if you want to > borrow them until yours come in. Let me know. They are the Type 4. Thanks for that Mike. I’ve been anxious to give em a try. Hoping they make me want to keep a board that’s too stiff. If u give me your e-mail I’ll get in touch. You’re probably only minutes away. Thanks again, Rob.

I have to go to Nichols Surf Shop after work. I’ll be there right before 6pm (they close around then). It is right on flagler ave. If you can make it, let me know.

I have to go to Nichols Surf Shop after work. I’ll be there right before 6pm (they close around then). It is right on flagler ave. If you can make it, let me know.

Herb, Just wondering if those replacement chargers got sent. Please let me > know if you need the address again. Thanks, Rob. …Sorry Rob,went to check my shop "outbox"and I still need to send them, there are however packed and labeled to go,along with a set for Jim Dunlop…I’m glad someone out there has an extra set,I don’t even have an extra set for myself right now.Thanks Mike d…Guess I need to make some more,Thanks guys.Herb.

Herb, Just wondering if those replacement chargers got sent. Please let me > know if you need the address again. Thanks, Rob. …Sorry Rob,went to check my shop "outbox"and I still need to send them, there are however packed and labeled to go,along with a set for Jim Dunlop…I’m glad someone out there has an extra set,I don’t even have an extra set for myself right now.Thanks Mike d…Guess I need to make some more,Thanks guys.Herb.

Herb:>>> E-mail me off the Board Archive- don’t have your new e-mail addy any more.>>> Tom Sterne …Sorry(again)I can receive e-mail right now, but for some dumb reason I can’t send any???>>>spitzersuperchargers@earthlink.net

Herb:>>> E-mail me off the Board Archive- don’t have your new e-mail addy any more.>>> Tom Sterne …Sorry(again)I can receive e-mail right now, but for some dumb reason I can’t send any???>>>spitzersuperchargers@earthlink.net

rob post your impressions of the superchargers.

rob post your impressions of the superchargers.

I ran out of fin plugs for the last set you gave me. I figured would just use them on my next thruster, instead of my beat up egg. I don’t want to seem like I took your offer for granted, I do appreciate your generous spirit. Do you need them? If so I can fedex them to you, and you can have them by Monday? Just let me know. Thanks for the fins and the great fish info. Between you and Magic Man I think that I will have decent shot at making a decent twin fin. So far so good.

I ran out of fin plugs for the last set you gave me. I figured would just > use them on my next thruster, instead of my beat up egg. I don’t want to > seem like I took your offer for granted, I do appreciate your generous > spirit. Do you need them? If so I can fedex them to you, and you can have > them by Monday? Just let me know. Thanks for the fins and the great fish > info. Between you and Magic Man I think that I will have decent shot at > making a decent twin fin. So far so good. Mike d.,>>>>>DO THIS FOR ME,since you guys are on the right coast,and I’m on the left… 1)Check out Rob’s board(6-4) flyer,especially the extra plugs(sometimes unknowing to the installer/customer the plug screw is in to upright and won’t work,I prefer center plugs,but I too have had my share of headaches with FCS plugs. 2)Check out his chargers(I KNOW I COULD GET THEM TO WORK FOR ME EVEN IF I HAD TO SUPERGLUE THEM ,WHICH BY THE WAY WORKS GREAT). 3)Lone him a set if needed and I will replace the set either to Rob or to you,Mike d. THANKYOU Mike FOR ALL YOUR CONCERNS,YOU ARE TRULY A RIGHT COAST BRUDDHA!Herb.

I will call Rob and check it out, and try to help. I did not think you could use a center plug for that application. I have a few left and will have to check it out. I figured that when you put the cant on the plug to match your front fin, you would run into problems when you put the resin in the fin plug hole (ie. won’t the resin get up on the top of part of the plug because the fin plug does not have any angle set in it?). I did notice on some of the superchargers the width of the tab a little narrow, and when you secure them with the inside screw it lessens the cant on the charger. In other words because the fin tab is a little loose, the inside pressure from the screw makes the supercharger sit straighter (more vertical) in the fin plug. Would super gluing the charger in first, then lightly securing it with the screw fine tune this? Thanks again.

I will call Rob and check it out, and try to help.>>> I did not think you could use a center plug for that application. I have a > few left and will have to check it out. I figured that when you put the > cant on the plug to match your front fin, you would run into problems when > you put the resin in the fin plug hole (ie. won’t the resin get up on the > top of part of the plug because the fin plug does not have any angle set > in it?).>>> I did notice on some of the superchargers the width of the tab a little > narrow, and when you secure them with the inside screw it lessens the cant > on the charger. In other words because the fin tab is a little loose, the > inside pressure from the screw makes the supercharger sit straighter (more > vertical) in the fin plug. Would super gluing the charger in first, then > lightly securing it with the screw fine tune this?>>> Thanks again. YES,that’s what I generally do!!!..works like a charm,and can be easily removed. With the center plugs, it’s just the opposite,it puts more cant in them.Herb.