supercharger bottoms/herb.

hey man, getting ready to hack another board out and i was wondering what bottom contours work best with the charger setup. i’m thinking of trying fairly deep dbl concaves/bonzer type bottom starting at about center going thru the fins. anything else you like best. boards gonna be 6’6 to 6’8 mini gun.

hey man,>>> getting ready to hack another board out and i was wondering what bottom > contours work best with the charger setup. i’m thinking of trying fairly > deep dbl concaves/bonzer type bottom starting at about center going thru > the fins. anything else you like best. boards gonna be 6’6 to 6’8 mini > gun.>>>>>>>>>I’ve put Al Merrick’s Flyer bottom’s(triple concave) in some of the Superchargers I have built,with great success!I use a slightly(3/8") cupped mono concave starting at mid line or so…trailing back to just behind the sidefins then back into a flat bottom to the tips. I don’t see why it wouldn’t work,just remember to not go to wild on the depth,and I think you’ll do great! Herb.

Herb, I’m curious to know how your superchargers would work with the CRV fins? I’ve been hearing a lot of negative feedback about the CRV’s from different people. Does the supercharger theory still work with the curved fin design? Thanks!

Herb, I’m curious to know how your superchargers would work with the CRV > fins? I’ve been hearing a lot of negative feedback about the CRV’s from > different people. Does the supercharger theory still work with the curved > fin design? Thanks!>>>>>>>.Yup! I have a few friends that sware by the FCS-CRV fins and my Superchargers together. I guess the secret is to use a G-3 center fin . Herb.