WANTED: I want to buy Four Way Fin System (4WFS) boxes and discs. Do you have any to sell me?

General Discussion
1

I was wondering if anyone had some Four Way Fin System (4WFS) boxes and discs they would sell me? I want to experiment making fins for that system and they don’t have a distributor in the US. To start I’m hoping to find just one box and all four of their different angled iDiscs (0,2,4,6) so I can experiment.

I’m located in Carlsbad - north San Diego county.

Thanks

2

why not just order them off thier site. Shipping isnt brutal for something that small. Plus exchange rate is really nice right now

3

I’m waiting for a quote from them. The reason I was hoping to find someone local was to buy one box and one disc just so I could experiment making a fin that fits it and to see if I like their system. Have you used their system? If so, do you know how difficult it would be to modify other fins to fit 4WFS, like FCS, Lokbox, Redbox, etc?

4

we did a few of the od verion, this box is different and i dont know about the fin tabs and such. i assume they are the same. 

FCS I beleive is too thin. the tabs a re closer to RED-X and lokbox size. I would guess you can mod the latter 2.

5

pm me and I’ll get details.

the tab is as deep and wide as RedX, but shorter.  I have an insert I’ll give you.  I don’t have a box, but the, I’m guessing you’ve looked at their site, insert goes in the box, and the fin goes in the insert, so you only need the insert to figure out making fins/the tab size.

 

6

I have a couple 2 degree discs to give you. Don’t have extra of the other cants. Nor plugs.

On the other thread, I mentioned how shipping is cheap. Dean got back to me and said they have a distributor in ca, so it’s best to order from the site.

I have some red x fins so I can see how much modding they need to fit. I’ll get back to you.

Also bought the utg jig if you wanna route some boxes. You can borrow it. Send me a pm. I’m only 30 min north of you.

If you’re content with the otg install, it’s just a one depth hole that you can do with a hole saw. There’s an eva sticker that they have to help you line up to the dots. Also acts as a resin dam. Makes it easy.

7

Okay, I sent you a PM. Thank you.

8

And I sent you a PM too. Thanks.