Howzit coastal, Are you glassing with poly or epoxy and on the foam or the hot coat. If it is poly and on the foam, then use Nova it's the best.Aloha,Kokua
Howzit coastal, Vacumn the area of the blank using a soft bristle used for chairs, you know the one I mean.This will make your tape stick really good, if you can hand tape off the pin lines on the blank then just airbrush them on the foam. This is the technique thatworks best for sanded finish boards. If it's a glossed board then wash the sanded board and tape off and use acrylic paint, but I find india ink works best, you can airbrush too. Many different techniques and it is up to the person as to which one he uses. Aloha,Kokua