wood lamination

im considering laminating wood vaneer on the board im building. i wanted to cut the vaneer in the shape of flames then glue it down with the resin. the vaneer is only about a little over 1/32nd of an inch, and i plan on just pushing the edges into the board for a smooth transition. is there any dangers to this. any tips would be appretiated. thanks chad hamel

If I were doing it…I’d lam the area to be veneered with 2 oz. glass, then contact cement the veneer to that, then glass over all that… I think that some really wild thing can be done with veneers…I’m gonna do flames or a rising sun at the fin area on a future board…