Hello Guys I have a quick question for you. I am in the process of making a couple of skimboards out of wood. The wood is very high quality and is not very porous. I am laminating both sides of the board and then putting on a regular hot-coat for the bottom. The problem that I’m running into is with the lamination. When I glass the board I see no air and the cloth seems to be saturated. When I come back there are spots that look to be unsaturated and even have some air. I have tried sitting with the board until the resin sets, but when I come back the next day, again the cloth looks unsaturated. I’m not exactly sure how to stop this problem and would like to hear if u guys have ever experimented with the glassing of wood. Any help will be great, thanks guys!