you asked for it

OK I now have in stock the new fin system ready for shipping. I will take some photo’s tomorrow and post them here. This fin system will hold fcs fins and the same fitting tools. Weight is lighter than a standard glass on fin, after the plug has been sanded to the board.This system is new to the market, you guys are the first to now about it out side my local area.its going to turn into something big for Southcoast Foam.Only one size fin at the moment but more are coming. $35.00 AUS per set for one off. My e-mail jphosking.bigpond.com or go to southcoast web site, make sure you let Rob know you are with swaylocks. Thanks Rabbit. http://www.southcoastfoam.com.au

OK I now have in stock the new fin system ready for shipping. I will take > some photo’s tomorrow and post them here. This fin system will hold fcs > fins and the same fitting tools. Weight is lighter than a standard glass > on fin, after the plug has been sanded to the board.This system is new to > the market, you guys are the first to now about it out side my local > area.its going to turn into something big for Southcoast Foam.Only one > size fin at the moment but more are coming. $35.00 AUS per set for one > off. My e-mail jphosking.bigpond.com or go to southcoast web site, make > sure you let Rob know you are with swaylocks. Thanks Rabbit. I can’t work you guys out. Some weeks ago you were all bitching about FCS and how someone should design a fin system thats cheaper and better than FSC and that also will take their fins. Will here its is and not one reply.sorry one reply to southcoast e-mail address. not even herb, what wrong with you guys. Rabbit (SAD RABBIT ) http://www.southcoastfoam.com.au

Rabbit: I just saw your post above and went over to Southcoast site for a look. Using the online request form I ran into a problem with your form. Here is the error message upon trying to submit my question and contact info: HTTP Error 405 405 Method Not Allowed The method specified in the Request Line is not allowed for the resource identified by the request. Please ensure that you have the proper MIME type set up for the resource you are requesting. Please contact the server’s administrator if this problem persists. Please advise. Do you have a link to any online info on the new fin system? Tom S.>>> I can’t work you guys out. Some weeks ago you were all bitching about FCS > and how someone should design a fin system thats cheaper and better than > FSC and that also will take their fins. Will here its is and not one > reply.sorry one reply to southcoast e-mail address. not even herb, what > wrong with you guys. Rabbit (SAD RABBIT )

Hey rabiit, you promised us pictures! Where are they? regards, Håvard

I just wanted to see 'em. How much is $35 aus. converted to the dollar?

I think I found the exchange rate. Does $16 dollars and some change sound about right? 1 dollar to .57 aus? If this is about right, I will get with my buddy and get some money together. Shipping should’nt be that much?

I think I found the exchange rate. Does $16 dollars and some change sound > about right? 1 dollar to .57 aus? If this is about right, I will get with > my buddy and get some money together. Shipping should’nt be that much? Mike Your Maths is correct. I await you order Tom Sorry about the e-mail Problem i will let Rob know Pictures will be done Saturday. Thanks Rabbit http://www.southcoastfoam.com.au